IP capability that fits the way installers already work
At Commtel, our focus is simple: secure entry systems that are straightforward to install, easy to manage, and supported long after commissioning.
As sites evolve, installers are being asked for more flexibility — video, remote management, scalable access — often without extra time on site.
The NX1 and NX250 were developed to meet that demand. They introduce IP capability into the Commtel range while keeping installation and programming clear and logical. They don’t just expand the product line. They make IP installs more predictable and easier to support.
Designed for consistency across the range
One of the biggest time drains on site is learning a new system.
When you’re working with any new product, the first install is about understanding the structure — how it’s programmed, how it’s commissioned, and how it behaves on site.
Commtel intercoms are designed around a consistent setup logic. Once you’ve installed one, the rest of the range follows the same principles.
The NX1 and NX250 use the Commtel CONFIG app for setup and ongoing changes, just like the wider Commtel range. The programming structure is clear, step-by-step, and installer-led.
That consistency means:
- Quicker installs.
- Fewer setup errors.
- Easier handovers.
So whether you’re new to Commtel or adding IP to an existing portfolio, you’re not learning a different system each time. The platform stays aligned across the range — which saves time as your experience with it grows.
Flexible connectivity without redesigning the site
Every NX1 and NX250 is supplied with both Ethernet and 4G connectivity built in as standard.
This doesn’t mean choosing one version over another. It means you have options on site.
If structured cabling is available, you can connect via Ethernet.
If cabling isn’t practical, you can use 4G.
If site conditions change, the hardware already supports both.
There’s no need to swap equipment or redesign the layout. The intercom is ready to adapt to the infrastructure available on the day.
Scales with the site, not against it
The NX1 and NX250 cover a wide range of applications without complicating your product choice.
The NX1 is well suited to controlled, single-entry environments.
The NX250 scales comfortably into large, multi-user sites.
Both use the same setup logic and programming approach, so moving between them doesn’t mean relearning the system. That consistency makes future expansions, upgrades, or additional entrances simpler to manage.
Less time on site after install
Remote management through the Commtel CONFIG and Commtel NEXUS apps allow:
- Changes without site visits.
- Faster support responses.
- Ongoing adjustments as site needs change.
For installers, that means:
- Fewer call-outs.
- Easier maintenance.
- Better support for end users over time.
It’s value that continues well beyond day one.
IP designed for real installs
The NX1 and NX250 build on the same principles that run across the Commtel range: straightforward installation, clear programming, and dependable support.
They introduce IP capability without adding complexity. You gain video calling, remote management, higher capacity, and scalability — while keeping the install practical and manageable.
For IP-led sites, they offer a clear next step.
For installers new to Commtel, they provide a structured and well-supported way into the range.
See how the NX1 and NX250 would integrate into your typical installations by visiting our demo room for a hands-on session. To book a visit, contact our team on 01306 710 120 (option 2) or email sales@commtel.io.